Most popular
DCITv7: Troubleshooting Cisco Data Center Infrastructure v7.0
What you'll learn
Describe how to troubleshoot the data center network
Describe the troubleshooting tools and methodologies that are available from the CLI and are used to identify and resolve issues in a Cisco Data Center network architecture
Identify and resolve issues that are related to: VLANs and PVLANs; port channels and virtual port channels; OTV; and VXLAN
Describe troubleshooting of routing protocols such as OSPF, EIGRP, and PIM.
Describe troubleshooting of the LAN security features
Identify and resolve issues that are related to a single device
Identify and resolve issues that are related to Fibre Channel interface operation
Identify and resolve Fibre Channel switching issues when the Cisco NX-OS Software is used in switched mode, and in NPV mode
Identify and resolve issues that are related to FIP and FCoE, including FCoE performance
Describe Cisco UCS architecture, initial setup, tools, and service aids that are available for Cisco UCS troubleshooting and interpretation of the output
Describe Cisco UCS configuration and troubleshoot related issues
Describe Cisco UCS B-Series Blade Server operation and troubleshoot related issues
Describe LAN, SAN, and Fibre Channel operations, including in-depth troubleshooting procedures
Describe Cisco IMC tools for validating performance and facilitating data-gathering activities for Cisco UCS C-Series server troubleshooting, and the troubleshooting approach for hardware and firmware failures
Define the proper procedures for configuring LAN and SAN connectivity, avoiding issues with the VIC, and troubleshooting connectivity issues
Troubleshoot Cisco UCS C-Series server integration with Cisco UCS Manager
Identify the tools, protocols, and methods to effectively troubleshoot Cisco ACI
Describe how to troubleshoot automation, scripting tools, and programmability
ENSLD: Designing Cisco Enterprise Networks
What you'll learn
Design EIGRP internal routing for the enterprise network
Design OSPF internal routing for the enterprise network
Design IS-IS internal routing for the enterprise network
Design a network based on customer requirements
Design BGP routing for the enterprise network
Describe the different types and uses of MP-BGP address families
Describe BGP load sharing
Design a BGP network based on customer requirements
Decide where L2/L3 boundary will be in your Campus network and make design decisions
Describe layer 2 design considerations for Enterprise Campus networks
Design a LAN network based on customer requirements
Describe layer 3 design considerations in an Enterprise Campus network
Examine Cisco SD-Access fundamental concepts
Describe Cisco SD-Access Fabric Design
Design an SD-Access Campus Fabric based on customer requirements
Design service provider-managed VPNs
Design enterprise-managed VPNs
Design a resilient WAN
Design a resilient WAN network based on customer requirements
Examine the Cisco SD-WAN architecture
Describe Cisco SD-WAN deployment options
Design Cisco SD-WAN redundancy
Explain the basic principles of QoS
Design QoS for the WAN
Design QoS for enterprise network based on customer requirements
Explain the basic principles of multicast
Designing rendezvous point distribution solutions
Describe high-level considerations when doing IP addressing design
Create an IPv6 addressing plan
Plan an IPv6 deployment in an existing enterprise IPv4 network
Describe the challenges that you might encounter when transitioning to IPv6
Design an IPv6 addressing plan based on customer requirements
Describe Network APIs and protocols
Describe YANG, NETCONF and RESTCON
ENCOR: Implementing and Operating Cisco Enterprise Network Core Technologies
What you'll learn
Illustrate the hierarchical network design model and architecture using the access, distribution, and core layers
Compare and contrast the various hardware and software switching mechanisms and operation, while defining the Ternary Content
Addressable Memory (TCAM) and Content Addressable Memory (CAM), along with process switching, fast switching, and Cisco Express Forwarding concepts
Troubleshoot Layer 2 connectivity using VLANs and trunking
Implementation of redundant switched networks using Spanning Tree Protocol
Troubleshooting link aggregation using Etherchannel
Describe the features, metrics, and path selection concepts of Enhanced Interior Gateway Routing Protocol (EIGRP)
Implementation and optimization of Open Shortest Path First (OSPF)v2 and OSPFv3, including adjacencies, packet types, and areas, summarization, and route filtering for IPv4 and IPv6
Implementing External Border Gateway Protocol (EBGP) interdomain routing, path selection, and single and dual-homed networking
Implementing network redundancy using protocols including Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP)
Implementing internet connectivity within Enterprise using static and dynamic Network Address Translation (NAT)
Describe the virtualization technology of servers, switches, and the various network devices and components
Implementing overlay technologies such as Virtual Routing and Forwarding (VRF), Generic Routing Encapsulation (GRE), VPN, and Location Identifier Separation Protocol (LISP)
Describe the components and concepts of wireless networking including Radio Frequency (RF) and antenna characteristics, and define the specific wireless standards
Describe the various wireless deployment models available, include autonomous Access Point (AP) deployments and cloud-based designs within the centralized Cisco Wireless LAN Controller (WLC) architecture
Describe wireless roaming and location services
Describe how APs communicate with WLCs to obtain software, configurations, and centralized management
Configure and verify Extensible Authentication Protocol (EAP), WebAuth, and Pre-shared Key (PSK) wireless client authentication on a WLC
Troubleshoot wireless client connectivity issues using various available tools
Troubleshooting Enterprise networks using services such as Network Time Protocol (NTP), Simple Network Management Protocol (SNMP), Cisco Internetwork Operating System (Cisco IOS®) IP Service Level Agreements (SLAs), NetFlow, and Cisco IOS Embedded Event Manager
Explain the use of available network analysis and troubleshooting tools, which include show and debug commands, as well as best practices in troubleshooting
Configure secure administrative access for Cisco IOS devices using the Command-Line Interface (CLI) access, Role-Based Access Control (RBAC), Access Control List (ACL), and Secure Shell (SSH), and explore device hardening concepts to secure devices from less secure applications, such as Telnet and HTTP
Implement scalable administration using Authentication, Authorization, and Accounting (AAA) and the local database, while exploring the features and benefits
Describe the enterprise network security architecture, including the purpose and function of VPNs, content security, logging, endpoint security, personal firewalls, and other security features
Explain the purpose, function, features, and workflow of Cisco DNA Center™ Assurance for Intent-Based Networking, for network visibility, proactive monitoring, and application experience
Describe the components and features of the Cisco SD-Access solution, including the nodes, fabric control plane, and data plane, while illustrating the purpose and function of the Virtual Extensible LAN (VXLAN) gateways
Define the components and features of Cisco SD-WAN solutions, including the orchestration plane, management plane, control plane, and data plane
Describe the concepts, purpose, and features of multicast protocols, including Internet Group Management Protocol (IGMP) v2/v3, Protocol-Independent Multicast (PIM) dense mode/sparse mode, and rendezvous points
Describe the concepts and features of Quality of Service (QoS), and describe the need within the enterprise network
Explain basic Python components and conditionals with script writing and analysis
Describe network programmability protocols such as Network Configuration Protocol (NETCONF) and RESTCONF
Describe APIs in Cisco DNA Center and vManage
ENWLSD: Designing Cisco Enterprise Wireless Networks
What you'll learn
Describe and implement a Cisco-recommended structured design methodology
Describe and implement industry standards, amendments, certifications, and Requests For Comments (RFCs)
Describe and implement Cisco enhanced wireless features
Describe and implement the wireless design process
Describe and implement specific vertical designs
Describe and implement site survey processes
Describe and implement network validation processes
SCOR: Implementing and Operating Cisco Security Core Technologies
What you'll learn
Describe information security concepts and strategies within the network
Describe common TCP/IP, network application, and endpoint attacks
Describe how various network security technologies work together to guard against attacks
Implement access control on Cisco ASA appliance and Cisco Firepower Next-Generation Firewall
Describe and implement basic email content security features and functions provided by Cisco Email Security Appliance
Describe and implement web content security features and functions provided by Cisco Web Security Appliance
Describe Cisco Umbrella security capabilities, deployment models, policy management, and Investigate console
Introduce VPNs and describe cryptography solutions and algorithms
Describe Cisco secure site-to-site connectivity solutions and explain how to deploy Cisco IOS VTI-based point-to-point IPsec VPNs, and point-to-point IPsec VPN on the Cisco ASA and Cisco FirePower NGFW
Describe and deploy Cisco secure remote access connectivity solutions and describe how to configure 802.1X and EAP authentication
Provide basic understanding of endpoint security and describe AMP for Endpoints architecture and basic features
Examine various defenses on Cisco devices that protect the control and management plane
Configure and verify Cisco IOS Software Layer 2 and Layer 3 Data Plane Controls
Describe Cisco Stealthwatch Enterprise and Stealthwatch Cloud solutions
Describe basics of cloud computing and common cloud attacks and how to secure cloud environment
ENAUI: Implementing Automation for Cisco Enterprise Solutions
What you'll learn
Describe the various models and APIs of the Cisco IOS-XE platform to perform Day 0 operations, improve troubleshooting methodologies with custom tools, augment the Command-Line Interface (CLI) using scripts, and integrate various workflows using Ansible and Python
Explain the paradigm shift of model-driven telemetry and the building blocks of a working solution
Control the tools and APIs to automate Cisco DNA infrastructure managed by Cisco DNA Center™
Demonstrate workflows (configuration, verification, health checking, and monitoring) using Python, Ansible, and Postman
Explain Cisco SD-WAN solution components, implement a Python library that works with the Cisco SD-WAN APIs to perform configuration, inventory management, and monitoring tasks, and implement reusable Ansible roles to automate provisioning new branch sites on an existing Cisco SD-WAN infrastructure
Manage the tools and APIs to automate Cisco Meraki managed infrastructure and demonstrate workflows (configuration, verification, health checking, monitoring) using Python, Ansible, and Postman
SVPN: Implementing Secure Solutions with Virtual Private Networks
What you'll learn
Introduce site-to-site VPN options available on Cisco router and firewalls
Introduce remote access VPN options available on Cisco router and firewalls
Review site-to-site and remote access VPN design options
Review troubleshooting processes for various VPN options available on Cisco router and firewalls
SSNGFW: Securing Networks with Cisco Firepower Next Generation Firewall
What you'll learn
Describe the Cisco Firepower Threat Defense system and key concepts of NGIPS and NGFW technology
Describe how to perform the configurations tasks required for implementing a Cisco Firepower Threat Defense device
Describe how to implement quality of service (QoS) and Network Address Translation (NAT) by using Cisco Firepower Threat Defense
Perform an initial network discovery using Cisco Firepower to identify hosts, applications, and services
Identify and create the objects required as prerequisites to implementing access control policies
Describe the behavior, usage, and implementation procedure for access control policies
Describe the concepts and implementation procedure of security intelligence features
Describe Cisco Advanced Malware Protection (AMP) for Networks and the implementation procedure of file control and advanced malware protection
Implement and manage intrusion policies
Explain the use of network analysis policies and the role of preprocessor technology in processing network traffic for NGIPS inspection
Describe and demonstrate the detailed analysis techniques and reporting features provided by the Cisco Firepower Management Center
Describe key Cisco Firepower Management Center system administration and user account management features
Describe the processes that can be used to troubleshoot Cisco Firepower Threat Defense systems
CCNA: Implementing and Administering Cisco Solutions
What you'll learn
Identify the components of a computer network and describe their basic characteristics
Understand the model of host-to-host communication
Describe the features and functions of the Cisco Internetwork Operating System (IOS®) software
Describe LANs and the role of switches within LANs
Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
Install a switch and perform the initial configuration
Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
Describe the TCP/IP Transport layer and Application layer
Explore functions of routing
Implement basic configuration on a Cisco router
Explain host-to-host communications across switches and routers
Identify and resolve common switched network issues and common problems associated with IPv4 addressing
Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
Describe the operation, benefits, and limitations of static routing
Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
Describe the application and configuration of inter-VLAN routing
Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
Configure link aggregation using EtherChannel
Describe the purpose of Layer 3 redundancy protocols
Describe basic WAN and VPN concepts
Describe the operation of Access Control Lists (ACLs) and their applications in the network
Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
Describe basic Quality of Service (QoS) concepts
Describe the concepts of wireless networks, which types of wireless networks can be built, and how to use Wireless LAN Controllers (WLCs)
Describe network and device architectures and introduce virtualization
Introduce the concept of network programmability and Software-Defined Networking (SDN) and describe smart network management solutions such as Cisco DNA Center™, Software-Defined Access (SD-Access), and Software-Defined Wide Area Network (SD-WAN)
Configure basic IOS system monitoring tools
Describe the management of Cisco devices
Describe the current security threat landscape
Describe threat defense technologies
Implement a basic security configuration of the device management plane
Implement basic steps to harden network devices
SISE: Implementing and Configuring Cisco Identity Services Engine v3.x
What you'll learn
Describe Cisco ISE architecture, installation, and distributed deployment options
Configure Network Access Devices (NADs), policy components, and basic authentication and authorization policies in Cisco ISE
Implement Cisco ISE web authentication and guest services
Deploy Cisco ISE profiling, posture, and client provisioning services
Describe administration, monitoring, troubleshooting, and TrustSec SGA security
Configure device administration using TACACS+ in Cisco ISE
Trending
DCITv7: Troubleshooting Cisco Data Center Infrastructure v7.0
What you'll learn
Describe how to troubleshoot the data center network
Describe the troubleshooting tools and methodologies that are available from the CLI and are used to identify and resolve issues in a Cisco Data Center network architecture
Identify and resolve issues that are related to: VLANs and PVLANs; port channels and virtual port channels; OTV; and VXLAN
Describe troubleshooting of routing protocols such as OSPF, EIGRP, and PIM.
Describe troubleshooting of the LAN security features
Identify and resolve issues that are related to a single device
Identify and resolve issues that are related to Fibre Channel interface operation
Identify and resolve Fibre Channel switching issues when the Cisco NX-OS Software is used in switched mode, and in NPV mode
Identify and resolve issues that are related to FIP and FCoE, including FCoE performance
Describe Cisco UCS architecture, initial setup, tools, and service aids that are available for Cisco UCS troubleshooting and interpretation of the output
Describe Cisco UCS configuration and troubleshoot related issues
Describe Cisco UCS B-Series Blade Server operation and troubleshoot related issues
Describe LAN, SAN, and Fibre Channel operations, including in-depth troubleshooting procedures
Describe Cisco IMC tools for validating performance and facilitating data-gathering activities for Cisco UCS C-Series server troubleshooting, and the troubleshooting approach for hardware and firmware failures
Define the proper procedures for configuring LAN and SAN connectivity, avoiding issues with the VIC, and troubleshooting connectivity issues
Troubleshoot Cisco UCS C-Series server integration with Cisco UCS Manager
Identify the tools, protocols, and methods to effectively troubleshoot Cisco ACI
Describe how to troubleshoot automation, scripting tools, and programmability
ENSLD: Designing Cisco Enterprise Networks
What you'll learn
Design EIGRP internal routing for the enterprise network
Design OSPF internal routing for the enterprise network
Design IS-IS internal routing for the enterprise network
Design a network based on customer requirements
Design BGP routing for the enterprise network
Describe the different types and uses of MP-BGP address families
Describe BGP load sharing
Design a BGP network based on customer requirements
Decide where L2/L3 boundary will be in your Campus network and make design decisions
Describe layer 2 design considerations for Enterprise Campus networks
Design a LAN network based on customer requirements
Describe layer 3 design considerations in an Enterprise Campus network
Examine Cisco SD-Access fundamental concepts
Describe Cisco SD-Access Fabric Design
Design an SD-Access Campus Fabric based on customer requirements
Design service provider-managed VPNs
Design enterprise-managed VPNs
Design a resilient WAN
Design a resilient WAN network based on customer requirements
Examine the Cisco SD-WAN architecture
Describe Cisco SD-WAN deployment options
Design Cisco SD-WAN redundancy
Explain the basic principles of QoS
Design QoS for the WAN
Design QoS for enterprise network based on customer requirements
Explain the basic principles of multicast
Designing rendezvous point distribution solutions
Describe high-level considerations when doing IP addressing design
Create an IPv6 addressing plan
Plan an IPv6 deployment in an existing enterprise IPv4 network
Describe the challenges that you might encounter when transitioning to IPv6
Design an IPv6 addressing plan based on customer requirements
Describe Network APIs and protocols
Describe YANG, NETCONF and RESTCON
ENCOR: Implementing and Operating Cisco Enterprise Network Core Technologies
What you'll learn
Illustrate the hierarchical network design model and architecture using the access, distribution, and core layers
Compare and contrast the various hardware and software switching mechanisms and operation, while defining the Ternary Content
Addressable Memory (TCAM) and Content Addressable Memory (CAM), along with process switching, fast switching, and Cisco Express Forwarding concepts
Troubleshoot Layer 2 connectivity using VLANs and trunking
Implementation of redundant switched networks using Spanning Tree Protocol
Troubleshooting link aggregation using Etherchannel
Describe the features, metrics, and path selection concepts of Enhanced Interior Gateway Routing Protocol (EIGRP)
Implementation and optimization of Open Shortest Path First (OSPF)v2 and OSPFv3, including adjacencies, packet types, and areas, summarization, and route filtering for IPv4 and IPv6
Implementing External Border Gateway Protocol (EBGP) interdomain routing, path selection, and single and dual-homed networking
Implementing network redundancy using protocols including Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP)
Implementing internet connectivity within Enterprise using static and dynamic Network Address Translation (NAT)
Describe the virtualization technology of servers, switches, and the various network devices and components
Implementing overlay technologies such as Virtual Routing and Forwarding (VRF), Generic Routing Encapsulation (GRE), VPN, and Location Identifier Separation Protocol (LISP)
Describe the components and concepts of wireless networking including Radio Frequency (RF) and antenna characteristics, and define the specific wireless standards
Describe the various wireless deployment models available, include autonomous Access Point (AP) deployments and cloud-based designs within the centralized Cisco Wireless LAN Controller (WLC) architecture
Describe wireless roaming and location services
Describe how APs communicate with WLCs to obtain software, configurations, and centralized management
Configure and verify Extensible Authentication Protocol (EAP), WebAuth, and Pre-shared Key (PSK) wireless client authentication on a WLC
Troubleshoot wireless client connectivity issues using various available tools
Troubleshooting Enterprise networks using services such as Network Time Protocol (NTP), Simple Network Management Protocol (SNMP), Cisco Internetwork Operating System (Cisco IOS®) IP Service Level Agreements (SLAs), NetFlow, and Cisco IOS Embedded Event Manager
Explain the use of available network analysis and troubleshooting tools, which include show and debug commands, as well as best practices in troubleshooting
Configure secure administrative access for Cisco IOS devices using the Command-Line Interface (CLI) access, Role-Based Access Control (RBAC), Access Control List (ACL), and Secure Shell (SSH), and explore device hardening concepts to secure devices from less secure applications, such as Telnet and HTTP
Implement scalable administration using Authentication, Authorization, and Accounting (AAA) and the local database, while exploring the features and benefits
Describe the enterprise network security architecture, including the purpose and function of VPNs, content security, logging, endpoint security, personal firewalls, and other security features
Explain the purpose, function, features, and workflow of Cisco DNA Center™ Assurance for Intent-Based Networking, for network visibility, proactive monitoring, and application experience
Describe the components and features of the Cisco SD-Access solution, including the nodes, fabric control plane, and data plane, while illustrating the purpose and function of the Virtual Extensible LAN (VXLAN) gateways
Define the components and features of Cisco SD-WAN solutions, including the orchestration plane, management plane, control plane, and data plane
Describe the concepts, purpose, and features of multicast protocols, including Internet Group Management Protocol (IGMP) v2/v3, Protocol-Independent Multicast (PIM) dense mode/sparse mode, and rendezvous points
Describe the concepts and features of Quality of Service (QoS), and describe the need within the enterprise network
Explain basic Python components and conditionals with script writing and analysis
Describe network programmability protocols such as Network Configuration Protocol (NETCONF) and RESTCONF
Describe APIs in Cisco DNA Center and vManage
ENWLSD: Designing Cisco Enterprise Wireless Networks
What you'll learn
Describe and implement a Cisco-recommended structured design methodology
Describe and implement industry standards, amendments, certifications, and Requests For Comments (RFCs)
Describe and implement Cisco enhanced wireless features
Describe and implement the wireless design process
Describe and implement specific vertical designs
Describe and implement site survey processes
Describe and implement network validation processes
SCOR: Implementing and Operating Cisco Security Core Technologies
What you'll learn
Describe information security concepts and strategies within the network
Describe common TCP/IP, network application, and endpoint attacks
Describe how various network security technologies work together to guard against attacks
Implement access control on Cisco ASA appliance and Cisco Firepower Next-Generation Firewall
Describe and implement basic email content security features and functions provided by Cisco Email Security Appliance
Describe and implement web content security features and functions provided by Cisco Web Security Appliance
Describe Cisco Umbrella security capabilities, deployment models, policy management, and Investigate console
Introduce VPNs and describe cryptography solutions and algorithms
Describe Cisco secure site-to-site connectivity solutions and explain how to deploy Cisco IOS VTI-based point-to-point IPsec VPNs, and point-to-point IPsec VPN on the Cisco ASA and Cisco FirePower NGFW
Describe and deploy Cisco secure remote access connectivity solutions and describe how to configure 802.1X and EAP authentication
Provide basic understanding of endpoint security and describe AMP for Endpoints architecture and basic features
Examine various defenses on Cisco devices that protect the control and management plane
Configure and verify Cisco IOS Software Layer 2 and Layer 3 Data Plane Controls
Describe Cisco Stealthwatch Enterprise and Stealthwatch Cloud solutions
Describe basics of cloud computing and common cloud attacks and how to secure cloud environment
ENAUI: Implementing Automation for Cisco Enterprise Solutions
What you'll learn
Describe the various models and APIs of the Cisco IOS-XE platform to perform Day 0 operations, improve troubleshooting methodologies with custom tools, augment the Command-Line Interface (CLI) using scripts, and integrate various workflows using Ansible and Python
Explain the paradigm shift of model-driven telemetry and the building blocks of a working solution
Control the tools and APIs to automate Cisco DNA infrastructure managed by Cisco DNA Center™
Demonstrate workflows (configuration, verification, health checking, and monitoring) using Python, Ansible, and Postman
Explain Cisco SD-WAN solution components, implement a Python library that works with the Cisco SD-WAN APIs to perform configuration, inventory management, and monitoring tasks, and implement reusable Ansible roles to automate provisioning new branch sites on an existing Cisco SD-WAN infrastructure
Manage the tools and APIs to automate Cisco Meraki managed infrastructure and demonstrate workflows (configuration, verification, health checking, monitoring) using Python, Ansible, and Postman
SVPN: Implementing Secure Solutions with Virtual Private Networks
What you'll learn
Introduce site-to-site VPN options available on Cisco router and firewalls
Introduce remote access VPN options available on Cisco router and firewalls
Review site-to-site and remote access VPN design options
Review troubleshooting processes for various VPN options available on Cisco router and firewalls
SSNGFW: Securing Networks with Cisco Firepower Next Generation Firewall
What you'll learn
Describe the Cisco Firepower Threat Defense system and key concepts of NGIPS and NGFW technology
Describe how to perform the configurations tasks required for implementing a Cisco Firepower Threat Defense device
Describe how to implement quality of service (QoS) and Network Address Translation (NAT) by using Cisco Firepower Threat Defense
Perform an initial network discovery using Cisco Firepower to identify hosts, applications, and services
Identify and create the objects required as prerequisites to implementing access control policies
Describe the behavior, usage, and implementation procedure for access control policies
Describe the concepts and implementation procedure of security intelligence features
Describe Cisco Advanced Malware Protection (AMP) for Networks and the implementation procedure of file control and advanced malware protection
Implement and manage intrusion policies
Explain the use of network analysis policies and the role of preprocessor technology in processing network traffic for NGIPS inspection
Describe and demonstrate the detailed analysis techniques and reporting features provided by the Cisco Firepower Management Center
Describe key Cisco Firepower Management Center system administration and user account management features
Describe the processes that can be used to troubleshoot Cisco Firepower Threat Defense systems
CCNA: Implementing and Administering Cisco Solutions
What you'll learn
Identify the components of a computer network and describe their basic characteristics
Understand the model of host-to-host communication
Describe the features and functions of the Cisco Internetwork Operating System (IOS®) software
Describe LANs and the role of switches within LANs
Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
Install a switch and perform the initial configuration
Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
Describe the TCP/IP Transport layer and Application layer
Explore functions of routing
Implement basic configuration on a Cisco router
Explain host-to-host communications across switches and routers
Identify and resolve common switched network issues and common problems associated with IPv4 addressing
Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
Describe the operation, benefits, and limitations of static routing
Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
Describe the application and configuration of inter-VLAN routing
Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
Configure link aggregation using EtherChannel
Describe the purpose of Layer 3 redundancy protocols
Describe basic WAN and VPN concepts
Describe the operation of Access Control Lists (ACLs) and their applications in the network
Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
Describe basic Quality of Service (QoS) concepts
Describe the concepts of wireless networks, which types of wireless networks can be built, and how to use Wireless LAN Controllers (WLCs)
Describe network and device architectures and introduce virtualization
Introduce the concept of network programmability and Software-Defined Networking (SDN) and describe smart network management solutions such as Cisco DNA Center™, Software-Defined Access (SD-Access), and Software-Defined Wide Area Network (SD-WAN)
Configure basic IOS system monitoring tools
Describe the management of Cisco devices
Describe the current security threat landscape
Describe threat defense technologies
Implement a basic security configuration of the device management plane
Implement basic steps to harden network devices
SISE: Implementing and Configuring Cisco Identity Services Engine v3.x
What you'll learn
Describe Cisco ISE architecture, installation, and distributed deployment options
Configure Network Access Devices (NADs), policy components, and basic authentication and authorization policies in Cisco ISE
Implement Cisco ISE web authentication and guest services
Deploy Cisco ISE profiling, posture, and client provisioning services
Describe administration, monitoring, troubleshooting, and TrustSec SGA security
Configure device administration using TACACS+ in Cisco ISE
All Cisco Courses
Cisco Certification Online Training Courses - Live
Filter by Topic
Filter by Vendor
SESAv3.1: Securing Email with Cisco Email Security Appliance v3.1
Course Description Learn to deploy high-availability email protection against the …
SISE: Implementing and Configuring Cisco Identity Services Engine v3.x
Course Description: Learn to install, configure, and deploy ISE with …
What you'll learn
Describe Cisco ISE architecture, installation, and distributed deployment options
Configure Network Access Devices (NADs), policy components, and basic authentication and authorization policies in Cisco ISE
Implement Cisco ISE web authentication and guest services
Deploy Cisco ISE profiling, posture, and client provisioning services
Describe administration, monitoring, troubleshooting, and TrustSec SGA security
Configure device administration using TACACS+ in Cisco ISE
SSNGFW: Securing Networks with Cisco Firepower Next Generation Firewall
Course Description: This lab-intensive 5-day course introduces the student to …
What you'll learn
Describe the Cisco Firepower Threat Defense system and key concepts of NGIPS and NGFW technology
Describe how to perform the configurations tasks required for implementing a Cisco Firepower Threat Defense device
Describe how to implement quality of service (QoS) and Network Address Translation (NAT) by using Cisco Firepower Threat Defense
Perform an initial network discovery using Cisco Firepower to identify hosts, applications, and services
Identify and create the objects required as prerequisites to implementing access control policies
Describe the behavior, usage, and implementation procedure for access control policies
Describe the concepts and implementation procedure of security intelligence features
Describe Cisco Advanced Malware Protection (AMP) for Networks and the implementation procedure of file control and advanced malware protection
Implement and manage intrusion policies
Explain the use of network analysis policies and the role of preprocessor technology in processing network traffic for NGIPS inspection
Describe and demonstrate the detailed analysis techniques and reporting features provided by the Cisco Firepower Management Center
Describe key Cisco Firepower Management Center system administration and user account management features
Describe the processes that can be used to troubleshoot Cisco Firepower Threat Defense systems
ENAUI: Implementing Automation for Cisco Enterprise Solutions
Course Description: Implementing Automation for Cisco Enterprise Solutions (ENAUI) is …
What you'll learn
Describe the various models and APIs of the Cisco IOS-XE platform to perform Day 0 operations, improve troubleshooting methodologies with custom tools, augment the Command-Line Interface (CLI) using scripts, and integrate various workflows using Ansible and Python
Explain the paradigm shift of model-driven telemetry and the building blocks of a working solution
Control the tools and APIs to automate Cisco DNA infrastructure managed by Cisco DNA Center™
Demonstrate workflows (configuration, verification, health checking, and monitoring) using Python, Ansible, and Postman
Explain Cisco SD-WAN solution components, implement a Python library that works with the Cisco SD-WAN APIs to perform configuration, inventory management, and monitoring tasks, and implement reusable Ansible roles to automate provisioning new branch sites on an existing Cisco SD-WAN infrastructure
Manage the tools and APIs to automate Cisco Meraki managed infrastructure and demonstrate workflows (configuration, verification, health checking, monitoring) using Python, Ansible, and Postman
ENWLSD: Designing Cisco Enterprise Wireless Networks
Course Description: Designing Cisco Enterprise Wireless Networks Gain the knowledge …
What you'll learn
Describe and implement a Cisco-recommended structured design methodology
Describe and implement industry standards, amendments, certifications, and Requests For Comments (RFCs)
Describe and implement Cisco enhanced wireless features
Describe and implement the wireless design process
Describe and implement specific vertical designs
Describe and implement site survey processes
Describe and implement network validation processes
ENSLD: Designing Cisco Enterprise Networks
Course Description: In this 5-day course, Designing Cisco Enterprise Networks …
What you'll learn
Design EIGRP internal routing for the enterprise network
Design OSPF internal routing for the enterprise network
Design IS-IS internal routing for the enterprise network
Design a network based on customer requirements
Design BGP routing for the enterprise network
Describe the different types and uses of MP-BGP address families
Describe BGP load sharing
Design a BGP network based on customer requirements
Decide where L2/L3 boundary will be in your Campus network and make design decisions
Describe layer 2 design considerations for Enterprise Campus networks
Design a LAN network based on customer requirements
Describe layer 3 design considerations in an Enterprise Campus network
Examine Cisco SD-Access fundamental concepts
Describe Cisco SD-Access Fabric Design
Design an SD-Access Campus Fabric based on customer requirements
Design service provider-managed VPNs
Design enterprise-managed VPNs
Design a resilient WAN
Design a resilient WAN network based on customer requirements
Examine the Cisco SD-WAN architecture
Describe Cisco SD-WAN deployment options
Design Cisco SD-WAN redundancy
Explain the basic principles of QoS
Design QoS for the WAN
Design QoS for enterprise network based on customer requirements
Explain the basic principles of multicast
Designing rendezvous point distribution solutions
Describe high-level considerations when doing IP addressing design
Create an IPv6 addressing plan
Plan an IPv6 deployment in an existing enterprise IPv4 network
Describe the challenges that you might encounter when transitioning to IPv6
Design an IPv6 addressing plan based on customer requirements
Describe Network APIs and protocols
Describe YANG, NETCONF and RESTCON
ENARSI: Implementing Cisco Enterprise Advanced Routing and Services
Course Description: Implementing Cisco Enterprise Advanced Routing and Services_x000D_n_x000D_nThe Implementing …
What you'll learn
Configure classic Enhanced Interior Gateway Routing Protocol (EIGRP) and named EIGRP for IPv4 and IPv6
Optimize classic EIGRP and named EIGRP for IPv4 and IPv6
Troubleshoot classic EIGRP and named EIGRP for IPv4 and IPv6
Configure Open Shortest Path First (OSPF)v2 and OSPFv3 in IPv4 and IPv6 environments
Optimize OSPFv2 and OSPFv3 behavior
Troubleshoot OSPFv2 for IPv4 and OSPFv3 for IPv4 and IPv6
Implement route redistribution using filtering mechanisms
Troubleshoot redistribution
Implement path control using Policy-Based Routing (PBR) and IP service level agreement (SLA)
Configure Multiprotocol-Border Gateway Protocol (MP-BGP) in IPv4 and IPv6 environments
Optimize MP-BGP in IPv4 and IPv6 environments
Troubleshoot MP-BGP for IPv4 and IPv6
Describe the features of Multiprotocol Label Switching (MPLS)
Describe the major architectural components of an MPLS VPN
Identify the routing and packet forwarding functionalities for MPLS VPNs
Explain how packets are forwarded in an MPLS VPN environment
Implement Cisco Internetwork Operating System (IOS®) Dynamic Multipoint VPNs (DMVPNs)
Implement Dynamic Host Configuration Protocol (DHCP)
Describe the tools available to secure the IPV6 first hop
Troubleshoot Cisco router security features
Troubleshoot infrastructure security and services
CLAUI: Implementing Automation for Cisco Collaboration Solutions
Course Description: The Implementing Automation for Cisco Collaboration Solutions (CLAUI) …
What you'll learn
Examine API and automation capabilities and concepts for Cisco Unified Communication Manager
Examine API and automation capabilities and concepts for Cisco Unity Connection
Examine API and automation capabilities and concepts for Cisco Finesse
Examine Experience API (xAPI) and automation capabilities and concepts for Cisco Collaboration endpoints
Examine API and automation capabilities and concepts for Cisco Webex Teams
Examine API and automation capabilities and concepts for Cisco Webex Meetings
